Work Order

Note:I am using a new reduction process effective immediately. This new process provides the best feeling reduction, while allowing for the maximum amount of size reduction. This is not a completely new process, but an evolutionary step for the process I have been using. With this new process, texturing will be done all the way to the bottom of the grip. Stndard texturing packages will remain the same. There is no extra charge for this service, just another way of giving the customers a choice.

Cold Bore Customs Current Services

Please Note:
  • The grip reductions can be performed on OD, Green, Gray, and Black framed pistols.
  • My reduction process does not require refinishing of the frame upon completion.
  • Future Services: I will be working on trying to get some refinishing and machining services up and running. Updates will be posted as the become avalible.
  • List of Services: This is a list of the most requested services I currently offer. If you do not see something listed here please feel free to contact me. Again, due to each project being done by hand, changes can be made as per customer request. The process that is used for the reduction and texturing will not separate or split. The texturing will not peel or flake off like spray on finishes. The texturing becomes part of the pistols grip.
    Shipping Information and Pricing: **Return shipping is no longer included in the reduction costs**. Return shipping for all work is $20.00. You may include a return shipping label in your order is you chose. For more detailed shipping information, please check out our Shipping Information page. A work order form must be included with each order.

    Standard Texturing package Glock,M&P, and XD: $65.00

    Backstrap, side panels and between finger grooves on all Glock pistols. The texturing can be continuous all the way around the back and sides of the grip at the owner’s request. On the XD this is for the backstrap and front strap. S&W M&P will be textured on one grip panel and the front grip area matching the lines.

    360 Texturing package Glock, M&P, and XD: $90.00

    This is the standard package plus texturing around the entire grip surface. For all Glock XD and M&P pistols. This can be done with or without the finger humps in place. See below for cost to remove finger humps.

    Finger Hump removal: $35.00

    This removes the humps on the front strap. The front strap will look and feel like the 2nd gen Glocks. This can be done without having to texture the entire grip. This does require texturing of the front strap. If included with the reduction, the cost is $25.00

    Basic Texturing Package: $45.00

    This is for Texturing the backstrap and in between the finger humps only. The factory checking is removed and replaced with the texturing of your choice.

    Backstrap texturing only: $35.00

    This is only for texturing the backstrap only. The factory checking is removed and replaced with requested texturing. This is only the rectangular area on the backtrap of the frame.

    Grip Reduction package: $165.00

    This reduces the backstrap section of the Glock pistols. It eliminates the hump. Option 1: Texturing can be done on the backstrap around to the sides and between the finger humps. Example of option 1 is the OD g19 on the images page. Option 2: Texturing can be done around the entire grip surface, same as 360 texturing. Example of option 2 is the black G19 pictured above the OD G19. Please specify which option you would like when you send your pistol. Either option is included in the price. Note: On the Gen4 Glock pistols, you lose the ability to switch backstraps.

    Glock Grip Chop: $70.00

    This modification reduces the overall length of the Glock grip. Example is chop from a G17/22 down to a G19/23 dimension. This modification can be done with or without a reduction. The bottom of the magwell is beveled to allow ease of magazine feeding. Please include the shorter magazine with your frame. This is to produce an exact match to your equipment. Texturing is not included in this price. Refer to the texturing packages for texturing prices.

    Undercut trigger guard: $15.00

    Removes a small amount of material from under the trigger guard. This allows a slightly higher hold on the pistol as well as eliminating "Glock Knuckle".

    Texturing forward frame flats: $15.00

    Includes both sides.

    Texturing of Grip panels S&W M&P: $15.00

    For each grip panel.

    Magwell Cutouts Glock or M&P: $30.00

    Two semicircular cuts are made on the side of the grip panels. These are to aid in magazine removal in the event of a stuck magazine The cuts are also radiused to eliminate magazines catching while feeding.

    Round Trigger guard $35.00

    This includes texturing on the underside of trigger guard, all or partial.

    Magazine extension texturing $20.00

    One magazine extension texturing is included with customer order. This is the cost to texture each extension after that. Note: A&G grip extensions are an extra charge of $20 for texturing only. $30 for reducing them to match a reduction and texturing.

    Glock "Bobtail" $50.00

    This Modification cuts off the bottom back of the grip section. It resembles the Ed Brown style Bobtail on the 1911. It reduces printing of the grip when carried as a CCW. The texture on the bobtail matches the OEM Glock texturing. The other textures are unable to be applied to the bobtail. This modification can only be performed on the midsiezed and full sized black non SF Glock frames due to the recessed magazine and grip design.

    M&P Trigger undercut and radius: $55.00

    This is for the S&W M&P. It undercuts the trigger, radius and smooths out the area. Includes smoothing and texturing of the triggerguard area as well. Front of triggerguard can be left smooth per customer request.

    Recess cut mag release "Glock" $20.00

    This Modification cuts a recess in the magzine release area. It allows for easier acess to the magazine release. I also radius the edges of the magazine release to remove the sharp edges. This is included in the price. This can not be done to the 4th gen frames.

    Glock trigger guard memory cut: $30.00

    This is a second undercut in the middle of the Glock triggerguard. It is a groove used by the support hand index finger. This can be textured or left smooth per request.

    Speedwell Option Glock: $35.00

    The back strap channel is filled and a speedwell is molded into the channel. This aids in magzine feeding. This is included in the reductons, but can be added to any Glock frame without a reduction.

    M&P Beavertail removal $35.00

    This removes the beaver tail from the M&P pistols.

    Please Note: These are just the most requested services listed. If there is something you would like to have done, please ask.

    Each one of these services or options is able to be individually tailored to the customer.

    Please specify what type of texturing/stippling you would like to have done at the time of your order.

    Turn around times will be quoted at the time of ordering. We no longer have a priority status for orders. Due to the demands of my full time LE position, and shop orders, there simply isn't enough time to set aside for priority orders. Doing so will cause every order to fall behind. Full time Law Enforcement and Military Personnel receive a 10% discount, credentials are required.

    All prices and information is current as of 09/01/2016. Prices are subject to change.

    Refer to the Shipping Information page for instructions on shipping and what should be included.

    Glock, Springfield XD, and S&W M&P are not related to this company.